Fig. 4. Connection diagram
5. PREPARATION AND OPERATION
Speaker placement
•
Place the speakers symmetrically to the listener at least one meter
away.
•
Bass re
fl
ex ports are located at the rear panels of speaker cabinets,
please locate the speakers about 20–30 cm away from the wall or any
other obstacle.
•
Place the speaker system far away from supersensitive monitors and TV
sets, as insigni
fi
cant image distortion in these devices is possible.
MSS
с
onnecting and control
SPS-707 Multimedia Speaker System can be connected to virtually any
audio source: DVD/CD, PC sound card, etc. (see connection diagram in
Fig. 4).
•
Before making any connections, make sure that the MSS is unplugged.
Connect the active speaker with the passive one using the audio cable
(included). To do this, release connector terminals on the passive speaker,
insert the audio cable «plus» (red) wire into «+» jack and the «minus»
(black) wire into «–» jack of connecting terminals (see connection diag-
ram in Fig. 4), and then connect the cable to the active speaker terminals
o
in the same way.
Note. Check the reliable
fi
xation of wires in terminals, connection compliance with polarity
and the absence of contact of bared wires with each other and the metal parts of the
hardware.
Fig. 3. Remote
control
f
g
h
i
c
b
a
PC
DVD
RESET
TREBLE
В
ASS
VOLUME
e
d
AUX
ENG
4
2.0 Multimedia Speaker System
POWER
ON
OFF
PC
DVD
AUX
SPEAKER OUT
~100V-240V/50Hz-60Hz
R
L
–
+
–
+
Power cable
2RCA to mini-jack
signal cable
Mini-jack to mini-jack
signal cable
2RCA to 2RCA
signal cable
PC
Player
Audio cable
CD
DVD
