Sven SPS-616, Руководство по эксплуатации

Страница: 16 / 19

ENG
15
Operation Manual
SPS-616
active
speaker
passive
speaker
5. LOCATING
• Place speakers symmetrically to the listener at a distance of not less than one meter.
• Since speaker system has a rear-mounted phase inverter
j
, place speaker system at the
distance of 20-30 cm from a wall or other obstacle.
• Place speaker system far away from TV sets, as insigni ԛ cant image distortion in supersensitive
monitors and TV sets is possible.
6. ACTIVE SPEAKER PANELS
a
BASS: Bass control knob
b
: Headphone jack
c
POWER/VOL: Power switch/volume control
d
TRE: Treble control knob
e
: Microphone jack
f
Signal cable mini-jack for connection of
sound source (green)
7. INSTALLATION AND OPERATION GUIDE
SPS-616 Multimedia Speaker System can be connected to virtually any audio source: DVD / CD, PC
sound card, etc. (see the ǥ onnection diagram, ԛ g. 3).
• Before connecting make sure that speaker system is switched o Ԛ .
• Plug mini-jack Ø 3.5 mm (green)
f
to the LINE IN port of the PC sound card, or connect it to
audio MP3 or CD-player then plug mini-jack 3.5 mm (pink)
g
to microphone input on your PC or
Laptop (see the ǥ onnection diagram, ԛ g. 3).
• Plug the power cable
i
into mains outlet.
• Switch on the device by POWER/VOL switch
c
and set volume level by turning POWER/VOL knob
g
Signal cable for connection
microphone jack to mini-jack (pink)
h
Bult-in acoustic cable
i
Bult-in power cable
j
Phase inverter
d
e
c
j
f
g
i h
b
Fig. 2. Back view Fig. 1. Front panel
a