Sven SPS-580, Руководство по эксплуатации

Страница: 14 / 16

2.0 Multimedia
Speaker System
ENG
14
PREPARATION AND OPERATION
Speaker placement
Place the speakers symmetrically to the listener at least one meter away.
Place MSS far away from monitors and TV sets, as insigni cant image distortion in these
supersensitive devices is possible.
MSS Connecting
SPS-580 2.0 Multimedia Speaker System can be connected to virtually any audio source: MP3
player, PC sound card, etc. (see connection diagram, Fig. 2).
Before making any connections, make sure that the MSS power supply is disconnected. Plug the
built-in 3.5 mm mini-jack signal cables: connect the audio cable (green mini-jack) to the audio output
jack of your sound source and the microphone cable (pink mini-jack) to the microphone jack (Fig. 2).
Connect the speaker to the mains outlet.
Turn on your audio source.
Adjust the master volume level by turning the VOLUME control knob
a
. To increase the volume,
turn the knob clockwise; to reduce it, turn the knob counterclockwise.
Plug your microphone into the microphone jack
b
, and your headphones into the headphone jack
d
.
Notes:
After nishing using the MSS, mind to switch it off.
To improve the sound quality, use the Line-Out output of your sound card.
Fig. 2. Connection diagram
Power cord
Mobile
device
PC
Socket
Audio cable
to MIC input
to audio source