2.0 USB Multimedia
Speaker System
ENG
4
PREPARATION AND OPERATION
Speaker placement
•
Place the speakers symmetrically to the listener at least one meter away.
•
Place MSS far away from monitors and TV sets, as insignificant image distortion in these supersensitive
devices is possible.
MSS Connecting
SPS-357 2.0 USB Multimedia Speaker System can be connected to virtually any audio source: MP3/
CD player, PC sound card, etc. (see connection diagram, Fig. 2).
•
Before making any connections, make sure that the MSS power supply is disconnected. Plug the
built-in 3.5 mm mini-jack signal cables: connect the audio cable (green mini-jack) to the audio output
jack of your sound source and the microphone cable (pink mini-jack) – to the microphone jack (see
connection diagram, Fig. 2).
•
Connect the built-in USB power cable to a USB port of your PC, laptop or to a 5V DC power supply
(not included).
•
Turn on your audio source.
•
Adjust the master volume level by turning the VOL control knob
b
. To increase the volume, turn the
knob clockwise; to reduce it, turn the knob counterclockwise.
•
Plug your microphone into the microphone jack
a
, and your headphones into the headphone
jack
c
.
Notes:
• After finishing using the MSS, mind to switch it off.
• To improve the sound quality, use the Line-Out output of your sound card.
Fig. 2. Connection diagram
USB jack
Mobile device
PC
Socket
Audio cable
Passive
speaker
Аctive
speaker
to audio source
to MIC input
