ENG
7
Rx-G830
User Manual
•
Creating a macro name
Hover your mouse over the
“Macro List”
,right-click, select
“New Macro”
.
In the
“Macro Name”
, window, enter macro name and click
“OK”
. The
macro name will appear in list.
Macro recording
Click on the macro name
“Macro List”
–
row with the name under it glows in
blue. Press
“Record”
, key, then you can type a sequence of characters from
the keyboard, if necessary, you can also emulate the click of a mouse button.
“Stop”
button stops recording commands.
•
More options for macros
In the lower right corner, there are options for latency and macro responses
to pressing macro button.
•
Record Delay
–
delay between commands will be generated by the duration
of pressing a key at the command recording stage.
•
Delay Setting
– delay is entered in ms (milliseconds).
•
No Delay
– no delay between commands.
•
Stop until the key release
– entering macro will continue until the macro
button is pressed.
•
Stop after the macro is over
– stop will only occur after the macro command
is fully entered.
