CONNECTION AND OPERATION
Attention! The built-in battery must be charged completely prior to the
application.
Speaker system battery charging
Connect speaker system to a USB port of PC or USB charger using mini USB to
USB cable (included). During battery charging the indicator
f
is red.
The battery BL-5C 3.7V 800 mAh is used in the speaker system.
OPERATION MODES
Bluetooth mode
Wireless data transfer via the Bluetooth protocol enables to connect speaker
system to compatible devises. Maximum radius of action of data transfer is 10 m. Such
obstacles as walls or other electronic devices can interfere with the signal transfer.
Turn on the speaker system mode Bluetooth switch
a
into position ON. The
speaker system automatically activates the
“
search
”
mode
via Bluetooth.
The indi-
cator
h
will start blinking blue color frequently.
It is necessary to select the search mode of devices with Bluetooth on a signal
source (telephone, notebook, smartphone, etc.).
“
SVEN PS-70BL
”
massage will be
displayed on the screen which is to be connected to*.
When connection is successful** there will be a short beep.
The indicator
h
blinks blue shortly during the data exchange with a device
connected via Bluetooth.
The use in the wired mode (AUX)
Turn on the speaker system, set the switch
a
in position ON. Then connect the
power signal cable mini-jack to mini-jack (included) to the AUX connector. AUX mode
is activated automatically when you connect the cable to the appropriate connector
on the speakers.
* You might have to enter 0000 code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search
mode activation is not obligatory. Choose the item name SVEN PS-70BL and the
“
connect
”
command on the source.
ENG
14
Portable Speaker
System with Bluetooth
