ENG
14
Portable Speaker System
with Bluetooth and FM-radio
CONNECTION AND OPERATION
Attention! The built-in battery must
be charged completely prior to the
application.
Speaker system battery charging
!
Connect speaker system to a USB
port of PC or USB charger using
micro USB to USB cable (included).
During battery charging the indicator
!
k
!
is red. Indicator
!
k
!
goes out when
the battery is charged.
!
The battery is used in the speaker system as an integral part of the device, therefore do
not try to extract or replace it, because this can result in the warranty cancellation or the
device damage.
Fig. 3. Rear panel
OPERATION MODES
Bluetooth mode
!
Wireless data transfer via the Bluetooth protocol enables to connect speaker system to
compatible devises. Maximum radius of action of data transfer is 10 m. Such obstacles as
walls or other electronic devices can interfere with the signal transfer.
!
Turn on the speaker system Bluetooth mode
!
press button
a
several times until
!
display shows «bt» inscription.
!
It is necessary to select the search mode of devices with Bluetooth on a signal source
(telephone, notebook, smartphone, etc.). «SVEN PS-430», massage will be displayed on
the screen which is to be connected to*.
!
When connection is successful, there will be a short beep and the indication of the search
mode on speaker system is over**.
* You might have to enter 0000 code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search mode
activation is not obligatory. Choose the item name SVEN PS-430 and the connect command on
the source.
Radio mode
!
Turn on the speaker system
!
press button
a
!
several times until the display shows the
station frequency. Long-term pressing button
!
g
!
activates auto search mode. After
scanning completion, the rst scanned radio station will start to operate automatically. With
buttons
!
f
!
and
!
h
!
select a desired radio station.
klm n op
DC 5V
ON OFF
USB
AUX
TF
CARD
