ENG
4
Portable Speaker System
with Bluetooth
j
DC 5V: Type-C jack for connecting speakers to the charger, the USB port of laptop/PC
k
AUX: 3.5 mm mini-jack for audio signal connecting (phone, MP3 player, etc.)
l
Micro SD: Micro SD card slot
CONNECTION AND OPERATION
Attention! The built-in battery must be charged completely prior to the application.
Speaker system battery charging
•
Connect speaker system to a USB port of PC or USB charger using USB to USB type-C
(included). When charging, the indicator
e
shows battery charging progress.
•
The battery is used in the speaker system as an integral part of the device, therefore
do not try to extract or replace it, because this can result in the warranty cancellation
or the device damage.
OPERATION MODES
Bluetooth mode
•
Wireless data transfer via the Bluetooth protocol enables to connect speaker system to
compatible devises. Maximum radius of action of data transfer is 10 m. Such obstacles as
walls or other electronic devices can interfere with the signal transfer.
•
Turn on the speakers in Bluetooth mode.
•
It is necessary to select the search mode of devices with Bluetooth on a signal source
(telephone, notebook, smartphone, etc.). «SVEN PS-390» message will be displayed on the
screen which is to be connected to*.
•
When connection is successful, there will be a short beep**.
МР3 player mode
Attention! The file system of a micro SD carrier is FAT32. Maximum volume is 32 GB. It is
not recommended to use the micro SD Ultra Speed.
•
Insert the micro SD carrier into appropriate slot. If the speaker system is in turned
on position, the playback will start automatically. Play/Pause modes are switched over
with the help of the button
d
. Tracks can be controlled by buttons
h
(previous track)
and
g
(next track).
Connecting an additional speaker
For model «SVEN PS-390» you can connect an additional speaker (Bluetooth mode only):
•
Turn on both speakers (long press button
a
)
and select Bluetooth mode.
•
On one of the speakers
or the active speaker (which is already connected to the source)
press button
b
.
The speakers will connect with each other.
•
Then connect the speaker to the signal source (see speaker connection via Bluetooth).
Note. At the subsequent inclusion of both speakers, they will be connected
automatically.
* You might have to enter «0000» code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second
search mode activation is not obligatory. Choose the item name «SVEN PS-390» and the
«connect» command on the source.
