ENG
4
Portable Speaker System
with Bluetooth and FM-radio
•
The battery is used in the speaker system as an integral part of the device, therefore
do not try to extract or replace it, because this can result in the warranty cancellation
or the device damage.
OPERATION MODES
Bluetooth mode
•
Wireless data transfer via the Bluetooth protocol enables to connect speaker system to
compatible devises. Maximum radius of action of data transfer is 10 m. Such obstacles as
walls or other electronic devices can interfere with the signal transfer.
•
Turn on the speakers in Bluetooth mode – press the button
d
repeatedly until the
button
d
blinks white short.
•
It is necessary to select the search mode of devices with Bluetooth on a signal source
(telephone, notebook, smartphone, etc.). «SVEN PS-290/295», massage will be displayed
on the screen which is to be connected to*.
•
When connection is successful, there will be a short beep and the indication of the
search mode on speaker system is over**.
Radio mode
To improve radio reception, connect USB-Type-C cable (included) to the input
k
.
•
Turn on the speaker system – press button
d
several times until, the radio mode will turn
on. Long-term pressing button
f
activates auto search mode. After scanning completion,
the first scanned radio station will start to operate automatically. With buttons
e
and
g
select a desired radio station.
МР3 player mode
Attention! The file system of a micro SD or USB flash carrier is FAT32. Maximum volume
is 32 GB. It is not recommended to use the micro SD Ultra Speed.
•
Insert the USB flash or micro SD carrier into appropriate slot. If the speaker system is
in turned on position, the playback will start automatically. Playback/Pause modes are
switched over with the help of the button
f
. Tracks can be controlled by buttons
e
(previous track) and
g
(next track).
Connecting an additional speaker
It is poddible to connect an additional speaker to the models «SVEN PS-290/295»
(Bluetooth mode only):
Attention! Before connecting an additional speaker, disconnect first speaker from
signal source.
•
Turn on both speakers (long press button
d
) and select Bluetooth mode. On both
speakers, button
d
will flash white flashes.
•
On one of the speakers, press and hold the button
c
until a beep sounds, then release
it. The speakers will connect with each other.
•
On both speaker, button
d
will glow continuously.
•
Then connect the speaker to the signal source (see speaker connection via Bluetooth).
* You might have to enter «0000» code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second
search mode activation is not obligatory. Choose the item name «SVEN PS-290/295» and
the «connect» command on the source.
