Portable Speaker System with
Bluetooth and FM-radio
ENG
4
CONNECTION AND OPERATION
Attention! The built-in battery must be charged completely prior to the application.
Speaker system battery charging
•
Connect speaker system to a USB port of PC or USB charger using micro USB to USB cable (included).
During battery charging the indicator
c
is red. Indicator
c
goes out when the battery is charged.
•
The battery is used in the speaker system as an integral part of the device, therefore do not try to
extract or replace it, because this can result in the warranty cancellation or the device damage.
OPERATION MODES
Bluetooth mode
•
Wireless data transfer via the Bluetooth protocol enables to connect speaker system to compatible
devises. Maximum radius of action of data transfer is 10 m. Such obstacles as walls or other electronic
devices can interfere with the signal transfer.
•
Turn on the speaker in Bluetooth mode.
•
It is necessary to select the search mode of devices with Bluetooth on a signal source (telephone,
notebook, smartphone, etc.). «SVEN PS-115», massage will be displayed on the screen which is to
be connected to*.
•
When connection is successful, there will be a short beep and the search mode on speaker system
is over**.
Radio mode
To improve the quality of radio reception, connect the microUSB – USB cable (included) to the
microUSB input or the mini-jack signal cable to the mini-jack (included) to the AUX input.
•
Turn on the speaker system – press button
j
several times until, the radio mode will turn on. Long-
term pressing button
h
activates auto search mode. After scanning completion, the first scanned
radio station will start to operate automatically. With buttons
i
and
g
(long pressing) select
a desired radio station.
Player mode
Attention! The file system of a micro SD carrier is FAT32. Maximum volume is 32 GB. It is not
recommended to use the micro SD Ultra Speed.
•
The system will enter the Player mode automatically when a carrier (USB flash or SD card) is
connected to corresponding ports. Use button
h
to switch between Play / Pause modes. You can
control tracks by using buttons
i
(previous track) and
g
(next track) (long pressing).
* You might have to enter “0000” code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search mode
activation is not obligatory. Choose the item name «SVEN PS-115» and the “connect” command on
the source.
The use in the wired mode (AUX)
•
Connect the 3.5 mm mini-jack cable to the 3.5 mm mini-jack (included) to the AUX input and the
3.5 mm jack to the signal source.
•
Turn on the speaker in AUX mode – press the button
j
several times until the speaker goes into
AUX mode.