Thank you for buying Sven Power Strip!
Sven Optima Pro Power Strip is intended for electrical appliances connection to AC power supply and for protec
tion from highvoltage pulses and highfrequency interference. In the main chain the filter includes power switch
and thermobimetallic breaker, highvoltage pulse varistor limiter and Cfilter on distributed varistor capacitance.
The filter case is made from a shock proof flameretardant material that is ABSplastic, also on state visible indi
cation is included. Eight universal sockets provide reliable contact of domestically produced and import power
plugs. The case design provides the Power Strip wall mount.
PRECAUTIONS
z
Do not connect to 380 V
z
Do not connect simultaneously the devices with total power more than 2,2 kW
z
Do not allow contact with solvents
z
Do not place the unit under humidity, near heat sources and in dirty places
z
Do not open and repair the device independently. Refer all servicing to qualified personal
INSTALLATION
1. Plug in necessary equipment to the Power Strip sockets.
2. Connect the Power Strip to AC power supply 220 V. Desirably to the socket with a ground terminal.
3. Set the switch to «I» state.
OPERATING INSTRUCTIONS
z
In case of overload after automatic fuse triggering it is recommended to wait for 510 minutes and then
to switch on the Power Strip again after total load shedding to tolerable limit.
z
In case of highvoltage pulses generation with more than maximum permissible energy on the Power Strip input
protective filter elements can fail. Further maintenance is not permissible. If necessary contact an Authorized
Service Center.
SPECIFICATIONS
Notice:
Above indices are for reference only.
Given specifications may not serve the basis for claims.
Durability — 2 years.
Optima pro
ENG
Rated voltage, V
220–230
Rated power, kW
2.2 (not more)
Operating frequency, Hz
50
Renewable thermobimetallic breaker
+
Line protection from highvoltage pulses
Phaseneutral
Interference and radio noise protection
up to 10 (max)
Maximum dissipated power, J
150
Maximum interference current withstood with voltage limiter, A
4 500
OPERATION MANUAL
