Problem
The MSS does not
turn on.
No sound or the
sound is too quiet.
Distortion of sound.
The remote control
is not working.
Cause
The MSS isn’t connected to a mains outlet.
The power switch is o
ff
.
Volume level is set at minimum value.
Improperly connected audio sources.
Large amplitude of the input signal.
The battery is discharged.
Solution
Check the connection.
Turn on the switch.
Adjust the volume control knob.
Connect the audio sources correctly.
Turn down the source volume and
the MSS volume.
Replace the battery with a new one.
Parameter, measurement unit
Output power (RMS), W
subwoofer
satellites
Frequency response, Hz
subwoofer
satellites
Speaker diameters, mm
subwoofer
satellites (mi tweeter)
Power supply, V/Hz
Dimensions, mm
subwoofer
satellites
ampli
fi
er module
Weight, kg
7. TECHNICAL SPECIFICATIONS
Notes:
• Technical speci
fi
cations given in this table are supplemental information and cannot give
occasion to claims. Speci
fi
cations and package contents are subject to change without
notice due to improvement of SVEN production.
Value
80 (40 + 2 × 20)
40
2 × 20
35 – 150
150 – 25,000
Ø 165
Ø 90 + Ø 22
~220/50
265 × 265 × 265
120 × 202 × 125
69 × 200 × 220
7.5
Notes:
• To improve the sound quality, use the Line Out port of your sound card.
• The MSS control description can differ from the given one in this Operation Manual due to
the constant improvement of the software. The last version of the Operation Manual see on
www.sven.
fi
.
If none of the above methods can solve the problem, please seek professional advice at your
nearest service center. Never attempt to repair the product yourself.
6. TROUBLESHOOTING
ENG
8
2.1 Hi-Fi Multimedia
Speaker System