Sven MK-715, Руководство пользователя, Страница: 4 / 14

ENG
4
Wireless Microphones Set
CONNECTING THE RECEIvER
•
Connect the signal cable (included) to the receiver jack AUDIO OUTPUT g and to the micro-
phone jack of the PC sound card or to the music center. If it is necessary, use adapter 6.3 mm
jack — 3.5 mm mini-jack.
•
Connect the signal receiver to the mains and turn it ON. Central receiver power indicator c
will light up.
•
Depending on which microphone is being used (A, B, or both) appropriate indicators will illu-
minate.
CONNECTING THE MICROPHONE
•
Remove the microphone battery cover. Install the 6LR61 battery. Observe the polarity as indicated
on the receiver case.
•
Set switch j to ON. If the microphone power indicator i , is not illuminated, please, replace the bat-
tery with a new one.
Note. For the best reception antenna А f and В e must be brought and installed in the ver -
tical position.
•
If the quality of microphone sound deteriorated, replace the microphone battery. Also try
to change the position of the receiver antenna to achieve optimum performance.
•
Remove the battery when you are not planning to use the microphone for a long time.
•
If you turn off the microphone may cause unwanted noise.
Attention! Protect the unit from direct sunlight and moisture. Keep it away from electromag -
netic waves. Do not hold the microphone to the speaker, and to each other.