ENG
6
2.0 Multimedia Speaker
System with Bluetooth
Note. Sound quality is directly affected by correctness and reliability of the connection of
cables. It is recommended that cables included into the package contents of the MSS be
used.
•
Connect the power cable to the jack
j
on the MSS, then plug the power cable into a mains
outlet.
•
Switch on the MSS by shifting the POWER switch
i
, into the ON position on the active speaker
rear panel. Then switch on an audio signal source.
•
Select a desired signal source by pressing the button VOLUME
b
on the control panel or button
INPUT
b
on the remote control (RC), after that the LED of the selected input will illuminate on the
control panel.
•
Adjust the volume level with button VOLUME
b
on the speaker control panel or with buttons
VOL+/-
f
on the remote control (see Fig. 3).
•
Adjust the treble and bass levels with buttons
c
and
d
on the speaker control panel.
•
After using the MSS, mind to switch it off with the ON/OFF switch
i
(OFF position) and unplug
the power cable from the mains socket.
Fig. 4. Audio sources connection diagram
