ENG
6
Wireless Gamepad
•
To check and configure in DirectInput mode, select
Properties in the Game Devices window, and the
Properties: USB Vibration Joystick (BM) window pops
up. In the «Function Test» tab, you can check the
execution of commands when you press the buttons
and rotate the joysticks, and also check whether the
joystick is connected to the PC in the «Connected State»
line (Fig.10).In the «Calibration Function» tab, you can
center the position of both joysticks (Fig. 10). To do this,
you need to set them to the middle position, then click
«Default» and «Set». After calibration, you must click
«Accept» or «OK» on the bottom line of this window to
save the changes.
•
In the «Vibration Test» tab, you can check the
operation of both vibrators together by pressing the
«Both force» button; or separately, by pressing the «Left
force» and «Right force» buttons. And also by rotating
the left joystick in the analog mode of operation or
by pressing the 8-way joystick in the digital mode of
operation (Fig. 11). To stop the test, press the «Stop»
button. Moving the cursor in the row «Vibration
strengthv» we can increase or decrease the force of
vibration. To save the settings, click «Apply» or «OK» in
the bottom line of this window.
•
The «About» tab provides information about the
version of the installed driver.
•
The device can work in analog and digital modes.
The modes are switch by pressing the HOME button,
depending on the mode, the operation mode LEDs light
up. In digital mode, two axes are available (indicator
lights up in purple), and in analog mode all 4 axes
(indicator lights up in pink).
•
With PS3.
•
Connect the receiver to an available USB port and turn
on the gempad. The system will automatically establish
a connection, and the LED corresponding to the number
of the gamepad in the system will light up.
•
With Android.
•
To connect to devices running Android, you need a USB OTG cable (not included). After
connecting the gamepad with this cable, the system will automatically establish a connection,
while the indicator lights up in red.
•
Connector for charging.
•
Connect the gamepad to the PC USB port or to the USB charger using the USB to the micro
USB cable (included). When charging, the decorative light comes on and the operation mode
indicator blinks.
