ENG
Operation Manual
5
GC-2040
Fig. 7
7.
CONNECTION AND INSTALLATION
•
Connect the USB receiver
o
to an available USB
port on the computer.
•
Download the software from the official site from the
product page and run the program «SVEN
Gamepad.exe».
•
In order to test and configure the gamepad,
choose
«
Control Panel» → «Devices and Printers», in the
Windows control panel (in the «XInput» mode, the
gamepad is displayed as «Xbox 360 Controller for
Windows», in the «DirectInput» - «PC/PS3/Android»),
then right-click on the device icon and select. Gaming
device parameters (administrator rights may be
required) (Fig.5,6). The «Game devices» window will
appear. In XInput mode, the gamepad is displayed as
«
Controller (XBOX 360 For Windows)» (Fig. 7), in the
«
DirectInput» mode - «USB Vibration Joystick (BM)»
(
Fig.8). To switch between the «DirectInput»
and
«
XInput» modes, you must press the HOME button for
the 6 seconds.
•
To check and configure in «XInput» mode, select «Properties» in the «Game devices» window, the
«Properties: Controller (XBOX 36 ...» window will pop-up (Fig.9). In the «Verification» tab, you can
check the execution of commands when you press the buttons and rotate the joystick. To calibrate
the joystick, select the «Settings» tab, click «Calibrate» and follow the instructions.
Fig. 5
Fig. 6
Fig. 8
