* You might have to enter “0000” code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search
mode activation is not obligatory. Choose the item name “SVEN AP-B480MV” and the “connect”
command on the source.
Headphones to a device interfacing
•
I
t is necessary first to interconnect the device with a signal source (see the connection
diagram in Fig. 2) to transfer signals via Bluetooth. To do this, turn on the headphones,
without releasing the
MODE button
c
. After a beep signal, waigt for starting the search
mode – the indicator
f
will alternate blue light.
•
It is necessary to select the search mode of devices with Bluetooth on a signal source
(telephone, notebook, smartphone, etc.). “SVEN AP-B480MV” massage will be displayed on
the screen which is to be connected to*.
•
When connection is successful, there will be a beep and the indication of the search
mode on headphones is over. If no device is connected, the search mode will be turned off
automatically in ten minutes. In this case in order to interface devices, the headphones
should be turned on to the search mode once again**.
•
The indicator
f
on the headphones lights blue and blinks red shortly during the data
exchange with a device connected via Bluetooth.
FM mode
•
Select FM tuner mode by pressing shortly the
MODE
button
c
. Pressing and holding
(2 sec) the button
a
, the tuner will enter the autoscan mode, and the LED indicator
f
will
alternate blue light with red one. After scanning completion, the first scanned radio station
will start to operate automatically. With buttons
b
and
d
select a desired radio station.
МР3 player mode
Attention! The file system of a micro SD carrier is FAT32. Maximum volume is 16 GB.
It is not recommended to use the micro SD Ultra Speed.
Fig. 2. Connection diagram
Phone
PC
Headphone
Audio cable
5
ENG
User’s Manual
AP-B480MV