Acoustic cable
Active speaker
Passive speaker
Built-in signal cable
Fig. 2. Connection diagram
/ower supply
ENG
3
Operation Manual
sven 260
6. CONTROL PANEL
a
VOLUME: Volume control wheel
b
Headphone jack
c
Power LED
7. INSTALLATION AND OPERATION
Sven 260 Multimedia Speaker System can be connected to
virtually any audio source: DVD/CD, PC sound card, etc.
(see Fig. 2 below).
•
Before connecting, make sure that the MSS is unplugged.
•
Connect the signal cable built into the active speaker to
anoutput of your PC sound card, MP3 or CD player, as
shown in Fig. 2.
•
Turn the VOLUME knob
a
to its minimum.
•
Connect the included power supply to the power cord built
into the active speaker (see Fig. 2). Insert the power supply
plug into a mains outlet. Power LED
c
will light up.
•
Adjust the volume level by turning VOLUME knob
a
.
•
Connect your headphones to the headphone jack
b
(see Fig. 1).
Notes:
• After using the MSS, mind to unplug the power supply plug from the mains outlet.
• To improve sound quality, use the Line-Out output of the sound card.
7/3 player
CD
PC
DVD
a
b
c
(on the side)
Fig. 1. Control panel
