Sven 248, Руководство по эксплуатации

Страница: 17 / 19

Turn on your audio source.
Adjust the master volume level by turning the control knob c . To increase the volume, turn the knob
clockwise; to reduce it, turn the knob counterclockwise.
Notes:
After nishing using the MSS, mind to switch it off.
To improve the sound quality, use the Line-Out output of your sound card.
17
ENG
Operation Manual
If none of the above methods can solve the problem, please seek professional advice at your nearest
service center. Never attempt to repair the product yourself.
Problem
The MSS does not
turn on.
No sound.
There is too quiet
sound of speakers.
Distortion of sound.
Cause
The MSS isn t connected to a mains outlet.
The volume level is set at minimum value.
Improperly connected audio source.
The volume level is set at minimum value.
Large amplitude of the input signal.
Solution
Check the connection.
Adjust the volume control knob.
Connect audio source correctly.
Adjust the volume control knob.
Turn down the source volume
and MSS volume.
6. TROUBLESHOOTING
SVEN 248