WSE201
3
SVAT ELECTRONICS
Now You Can See
INST
INST
ALLING THE CAMERA
ALLING THE CAMERA
(TRANSMITTER)
(TRANSMITTER)
1.
Unpack the camera.
2.
The camera's channel number can be set by unscrewing the lens part of camera to
open the lens cover, and adjusting the dip switches.
3.
Decide whether the camera will be wall-mounted or sit on a desk/table top. If wall
mounting, use the mounting hardware in the package. The camera can be adjusted
for either mounting scenario by rotating the camera to the required position.
4.
If using the 9V camera power adapter, just connect power jack. Make sure the
camera is positioned no more than 5 1/2 feet from an AC power outlet.
INST
INST
ALLING THE RECEIVER
ALLING THE RECEIVER
MAIN OPERATION
1.
Connect one end of the cable (4 PIN DIN) to the back of the receiver, and the yellow
plug (RCA composite) to the VIDEO IN jack of your TV/VCR/DVR. If you are using
this system with a camera that supports audio, also plug in the red and white
RCA plugs.
2.
Plug the receiver's power supply into the power jack located on the back of the unit
and plug the power adapter into any power outlet.
3.
Place the receiver either on top or near your TV. Rotate the antenna to a
vertical position.
4.
Set your TV to VIDEO INPUT mode to view your camera.
5.
For recording camera footage using your VCR, see advanced features.