SVAT ELECTRONICS
now you can see
CLEARVU11
21
MAIN MENU
•
Detection Settings -
Calls up a grid system used for masking areas of the camera’s view. Fully explained on
the next page.
•
Buzzer
– this option allows you to choose to activate the internal buzzer (or not) when motion of this camera
is detected. Press
ENTER
or +/- to check/uncheck this item. The default setting is “
” - checked
•
Log
– this option allows you to choose to log your events. Press
ENTER
or +/- to check/uncheck this item. The
default setting is “
” - checked.
•
Screen Message
– to display the event message on the screen or not. Press
ENTER
or +/- to check/uncheck
this item. The default setting is “
” - checked.
•
– to send the event e-mail to a pre-determined email or not. The e-mail will be sent to the predefined
receivers when the event is triggered. Press
ENTER
or +/- to check/uncheck this item. The default setting is
“–” - unchecked.
The general operations are as below:
•
▲▼
-- Press these buttons to select the items.
•
Numeric (CH1-CH4) -
Press these buttons to select the camera.
•
COPY
( ) - Press this button to copy the Motion settings, including Detection settings, of the focus camera
to all the following cameras. (E.g. focus camera is 1, its Motion settings will be copied to those of cameras 2-4.)
•
ESC (MENU/ESC) -
Press this button to escape from this screen, and return to Camera Setup display. If the Save
dialog is shown, press
ENTER
to exit and save,
ESC (MENU/ESC)
to exit without saving.
