
32
ADDITIONAL FEATURES - MIDI EXPANDER MODE
Plug a MIDI cable into the MIDI Out Jack on the MIDI device that
you want to connect to the Q Chord.
The Q Chord has MIDI In and Out Jacks. This page is devoted to
the MIDI expander mode of the unit, for further information on
MIDI please see the MIDI section of this manual.
You should select the “Expander” mode when you want to use
your Q Chord as a “sound source.” You may connect it with other
MIDI instruments (keyboards, guitars etc..) or computers, se-
quencers and other MIDI devices.
When the Expander Mode is engaged all control buttons and
functions are disabled, as the unit is prepared to playback the
MIDI data it will receive from the MIDI In port.
1
TYPICAL MIDI EXPANDER SET UP
Plug the other end of the MIDI cable into the MIDI In jack on the
Q Chord.
2
Q CHORD JACK PANEL
Press the G Major Button one time.
The Q Card Control LCD will turn on and “EP” should be displayed.
The instrument is now in the Expander mode.
When the Q Chord is in this mode it can not be played.
To disengage this mode press the G major chord button
again and turn off the Melody Keyboard LED.
Q TIP: The MIDI input channels are preset and can not be ma-
nipulated. For further MIDI specifications see the MIDI implemen-
tation chart and the MIDI section of this manual.
4
Press the Melody Keyboard button twice.
The Melody Keyboard LED should now be on and the Bass
Control LED should now be off.
3
EP
Содержание qc-1
Страница 1: ...SUZUKI Q CHORD Owners Manual MODEL QC 1 ...
Страница 51: ...51 ...