Suzuki Maruti S-Cross, Руководство пользователя

Страница: 138 / 184

8-13
INSPECTION AND MAINTENANCE
55KS0-74E
55KS0-74E
54G317
(1) FULL HOT
(2) LOW HOT
(3) The lowest point = Fluid level
8) Add just enough specified fluid through
the dipstick hole to fill the transmission
to the proper level.
Changing Oil
Since special procedures, materials, and
tools are required to change the automatic
transmission oil, it is recommended that
you trust this job to your authorized
SU
Z UKI dealer.
Gear Oil
Specified Gear Oil
Manual transmission oil
54G095
When adding gear oil, use gear oil with the
appropriate viscosity and grade as shown
in the chart above.
We highly recommend you use:
API GL-4 SAE 75W-90 for manual trans-
mission gear oil.
Gear Oil Level Check
Manual transmission
79J143
To check the gear oil level, use the follow-
ing procedure:
1) Park the vehicle on a level surface with
the parking brake applied. Then, stop
the engine.
2) Remove the oil filler plug ((1) or (2)).
3) Check the inside of the hole with your
finger. If the oil level comes up to the
bottom of the plug hole, the oil level is
correct. If so, reinstall the plug.
4) If the oil level is low, add gear oil
through the oil filler plug hole ((1) or (2))
until the oil level reaches the bottom of
the filler hole, then reinstall the plug.
Tightening torque for oil filler
and level plug ((1) and (2))
21 Nm (2.1 kgf-m, 15.2 lb-ft)
CAUTION
After checking or adding oil, be sure
to insert the dipstick securely.
(1)
(2)
(3)
(1)
(2)
(3)
Engine Coolant: 1, 2
138