Suzuki GSX1250FA, Руководство пользователя

Страница: 92 / 135

6-32
DRIVE CHAIN ADJUSTMENT
Adjust the drive chain slack to the
proper specification. The chain may
require more frequent adjustments
than indicated in the periodic mainte-
nance schedule depending upon your
riding conditions.
To adjust the drive chain, follow the
procedure below:
1. Place the motorcycle on the side
stand.
2. Loosen the axle nut
1
.
3. Loosen the right and left lock nuts
2
.
20 – 30 mm
4. Adjust the drive chain slack by
turning the right and left chain
adjuster bolts
3
. At the same time
that the chain is being adjusted,
the rear sprocket must be kept in
perfect alignment with the front
sprocket. To assist you in perform-
ing this procedure, there are refer-
ence marks
4
on the swingarm
and each chain adjuster which are
to be aligned with each other and
to be used as a reference from
one side to the other.
5. Tighten the right and left lock nuts
2
.
6. Tighten the axle nut
1
securely.
7. Recheck the chain slack after
tightening and readjust if neces-
sary.
Rear axle nut tightening torque:
100 N·m (10.0 kgf-m, 72.5 lbf-ft)

WARNING
Too much chain slack can cause
the chain to come off the sprock-
ets, resulting in an accident or
serious damage to the motorcycle.
Inspect and adjust the drive chain
slack before each use.