8
Place the rubber boot.
A: Rubber boot
B: Cable lock nut
Clamp the rubber boot with the strap.
A: Strap L:100 mm
B: Rubber boot
Remove the crate axle bracket from the crate base.
A: Crate axle bracket
B: Bolt
1
. Lift the front of motorcycle by using a hoist.
2
. Raise the rear of motorcycle.
3
. Pull the crate base forward, then balance the
motorcycle.
NOTE:
Move the rubber boot until it comes to contact
with the cable lock nut.
NOTE:
Cut off the excess strap as shown in the photo-
graph.
NOTE:
The bracket and bolt are no longer needed and
may be discarded.