Suzuki 2008 VL800, Руководство пользователя, Страница: 74 / 123

7-18
6. Smear a little engine oil
around the rubber gasket of
the new oil filter.
7. Screw the new filter by hand
until the filter gasket contacts
the mounting surface (a small
resistance will be felt).
NOTE: To tighten the oil filter
properly, it is important to accu-
rately identify the position at
which the filter gasket first con-
tacts the mounting surface.
8. Mark the top dead center posi-
tion on the “cap type” filter
wrench or on the oil filter. Use
an oil filter wrench to tighten
the filter 2 turns or to specified
torque.
Oil filter tightening torque:
20 N·m (2.0 kgf-m, 14.5 lbf-ft)
9. Reinstall the drain plug and
gasket. Tighten the plug
securely with a wrench.
CAUTION
Using an oil filter with the
wrong design or thread specifi-
cations can cause oil leaks or
engine damage.
Use a genuine SUZUKI oil filter
or an equivalent filter designed
for your motorcycle.
Mark top dead center
Oil filter wrench
In the position at
which the filter
gasket first contacts
the mounting
surface.
Tighten the filter 2 turns or
to specified torque.