manualshive.com logo in svg

Suzuki 2003 SV1000SK3, Руководство по обслуживанию, Страница: 3 / 32

Поделиться
Скачать
Suzuki 2003 SV1000SK3 Скачать руководство пользователя страница 3

2     SV1000K3

SPECIFICATIONS

DIMENSIONS AND DRY MASS

Overall length....................................................... * 2 135 mm (84.1 in)
Overall width ........................................................ *    785 mm (30.9 in)
Overall height....................................................... * 1 080 mm (42.5 in)
Wheelbase ........................................................... * 1 445 mm (56.9 in)
Ground clearance ................................................      150 mm (  5.9 in)
Seat height........................................................... *    800 mm (31.5 in)
Dry mass.............................................................. *  187 kg (412 lbs) .........For E-33

*  186 kg (410 lbs) .........For the others

ENGINE

Type .....................................................................4-stroke, liquid-cooled, DOHC, 90° degree V-twin
Number of cylinders .............................................2
Bore .....................................................................98.0 mm (3.858 in)
Stroke................................................................... 66.0 mm (2.598 in)
Displacement ....................................................... 996 cm³ (60.8 cu. in)
Compression ratio................................................ 11.3 : 1
Fuel system.......................................................... Fuel injection
Air cleaner............................................................ Non-woven fabric element
Starter system...................................................... Electric
Lubrication system ............................................... Wet sump
Idle speed ............................................................ 1 200 ± 100 r/min

DRIVE TRAIN

Clutch................................................................... Wet multi-plate type
Transmission........................................................ 6-speed constant mesh
Gearshift pattern .................................................. 1-down, 5-up
Primary reduction ratio......................................... 1.838 (57/31)
Gear ratios,  Low .................................................. 2.666 (32/12)

2nd...................................................1.933 (29/15)
3rd ...................................................1.500 (27/18)
4th.................................................... 1.227 (27/22)
5th.................................................... 1.086 (25/23)
Top .................................................. 1.000 (24/24)

Final reduction ratio .............................................2.352 (40/17)
Drive chain ........................................................... * RK50SMOZ1, 110 links

Содержание 2003 SV1000SK3

































Отзывы:

Нет отзывов