Suzohapp ARPEGE SECURITY SC-350, Техническое руководство

Страница: 25 / 114

Technical Description
Technical Handbook 019722-101 Rev. 05
15
SC-350/360
Feed mechanism
The feed mechanism is driven by the main motor via three drive
belts. The feed unit could easily be removed when it is attached to
the chassis with only one screw, see “Feed Unit - Removal” on page
51 .
Thickness selector and thickness guide block
Turn the thickness selector knob (1) to select the thickness of the
coins to be counted. The thickness guide block (2) is moved via the
swing unit, see “Swing mechanism” on page 16 , in parallel motion
(vertical linear motion) with the coin disc to set the correct coin
thickness gap.
The thickness unit could easily be dismounted since it is attached to
the chassis with only one screw, see “Thickness Unit - Removal” on
page 54 . To adjust the parallelism, see “Thickness guide block -
Parallelism” on page 73 .
The feed unit is also moved in the same way via the swing
mechanism), when turning the thickness selector knob.
SC-350
1 Thickness selector knob
2 Thickness guide block
1
2