Suunto X6HR, Инструкция по эксплуатации

Страница: 47 / 70

45
Logbook marks
You can add marks to the logbook file and save the information on the altitude of a
specific point and time. This can only be done in Hiking mode. The maximum number
of marks in each file is 10.
Adding a mark to the logbook file also records the heart rate of the same specific time
if the heart rate monitor is active.
To add a mark, short press
Start when the logbook is running. A long press activates
the backlight and no logbook mark is made. The marks are added the logbook file and
they can be viewed through the file list (see page 42). When you have added the mark,
the message “
MARK POINT SAVED
” is displayed.
When you have saved the marks, the PC can create a profile that connects them with
a line. With this feature you can, for example, create a simplified altitude profile of your
trip. You can also use marks to compare the difference in time and altitude between two
points of the trip. (Compare with the Differ function on page 40.)
3.5.3. Use
With the Use function you can define whether the air pressure measurement is used to
set the altitude or to represent the weather conditions. For more information, refer to
page 32.
3.5.4. Altitude
With this function you can set the reference altitude. For more information about the
reference altitude, refer to page 33.
3.5.5. Alarms
The altitude alarm is intended to warn you if you pass the preset altitude limit.