Suunto Tank POD, Руководство пользователя, Страница: 12 / 28

3. From the list of Tank PODs, select the one which matches the serial number of your
Suunto Tank POD.
4. Make sure the Suunto Tank POD has been activated by ensuring the tank pressure
reading shows on screen and POD green led is blinking.
In the dive main views, only one tank pressure is shown and corresponds to the active gas.
When you change gas, the displayed tank pressure changes accordingly.
WARNING: If there are several divers using Tank PODs, always check before you dive
that the POD number of your selected gas corresponds to the serial number on your POD.
TIP: Remove pressure from the Tank Pod when not diving to save battery life.
For Suunto D5
To pair your Suunto Tank POD:
1. After installing Suunto Tank POD and opening the valve, wait for the green LED on the
POD to flash.
2. If your dive computer has a blank screen, press any button to activate it.
3. Use proximity pairing: Hold your dive computer close to the Suunto Tank POD. Make sure
you follow the instructions in 5.3. Tank POD alignment.
4. After a few seconds, a menu pops up on the screen showing the Suunto Tank POD serial
number, battery status, and the tank pressure. Select the correct gas from the list to pair
with your device and press middle button to confirm pairing.
Suunto Tank POD
12