Suunto N3i, Инструкция по эксплуатации

Страница: 19 / 44

17
Timer-Stop
This is a countdown timer. It starts the set countdown time
when activated and stops it after the time has run out.
1. Enter the Chrono mode.
2. Press ENTER to access the chronograph sub-menu.
3. Select
Timer Intervals
4. Select Timer-Stop
5. Set the desired countdown time (seconds and minutes)
with PREVIOUS or NEXT/STOP and accept the selections with ENTER. The
message ‘
TIMER
-
STOP INTERVAL SET
’ is displayed and you return to the
chronograph display.
6. Press ENTER to access the chronograph sub-menu.
7. Select
Timer .
8. Select Timer-Stop . The message ‘
TIMER
-
STOP ACTIVATED
’ is displayed and you
return to the chronograph display.
9. Use PREVIOUS to toggle between your selected countdown time and 0.00,0.
10.Press START/LAP/LIGHT to start the countdown. When the countdown reaches
zero, the chronograph stops automatically. You can also stop the chronograph
manually by pressing NEXT/STOP.
11.Press and hold NEXT/STOP for 2 seconds to reset the chronograph.