Suunto N3, Инструкция по эксплуатации

Страница: 18 / 43

16
•Timer-Repeat activates the set interval times one after
another (maximum of 20 different intervals) and after they
are finished, it returns to the normal Chronograph function.
The Chronograph is activated when the first interval is
started by the press of STARTSTOP/LIGHT and stops only
when stopped by the press of STARTSTOP/LIGHT.
To set and activate Timers:
1.Long press CHANNEL to go to the Time channel. Wait for
the watch face to appear.
2.Press CHANNEL to open the Time splash screen.
3.While the Time splash screen is visible, press PREVIOUS
to select Chrono. The Chrono mode’s main display opens.
4.Press ENTER to navigate to the Timer function display.
5.Use PREVIOUS and NEXT/LAP to select either Timers to
activate any of the three timers or Timer Intervals to set intervals to different timers.
6. On the Activate Timer display, select a suitable timer with PREVIOUS or NEXT/
LAP and press ENTER. Suunto n3 confirms your selection and returns to the
Chrono mode. If you want to deactivate Timers and use the Chronograph without
any countdown alarms, select and accept All Off in the menu.
7. On the Timer Intervals display, use PREVIOUS or NEXT/LAP to select any of the
three timers for setting the Interval time. For Timer-Repeat you can also set the
number of intervals along with their times.