Sutter Instrument MP-225A, Руководство по эксплуатации

Страница: 13 / 36

MP-225A MOTORIZED MICROMANIPULATOR SYSTEM OPERATION MANUAL – REV. 2.04 (20211111)
3
2. INSTALLATION
2.1 Unpacking and Mountings Instructions
When installing the MP-225 system for the first time, it is recommended that the
components of the system be installed in the following order: MP-225 electromechanicals
micromanipulator first followed by the MP-225A integrated ROE/Controller.
IMPORTANT
Once the MP-225 system has been unpacked, remove two shipping screws from each axis of
the micromanipulator. These screws must be removed before operating the MP-225 system or
damage may occur. If you need to transport the MP-225 series in the future, reinstall the
shipping screws or apply 2 to 3-inch pieces of making taped to side of each axis. Once the
shipping screws have been removed, handle the MP-225 with care. The mechanism can be
damaged if any if the axes are inadvertently moved by hand or if the manipulator is dropped
or put down forcefully.
The following sections describe how to mount the MP-225 manipulator to an stand using the
mounting adapter plate, how to adjust the pipette angle and how to mount different
headstages.
2.1.1 Mounting the MP-225 Series to the Stand or Platform
The MP-225 attaches to the mounting adapter plate using four M3.5x6 hex head locking
screws.