Sutter Instrument Lambda 421, Руководство по эксплуатации

Страница: 9 / 42

LAMBDA 421 OPERATION MANUAL – REV. 1.00N (20170623)
1
1. INTRODUCTION
1.1 Introduction
The Lambda 421 is an illumination system designed for the rapid change of wavelength
derived from up to four light sources of different wavelengths combined into a single beam.
The system comprises of three subsystems: controller, Optical Beam Combiner (ODC), up to
four LED light sources, and power supply. All four subsystems are conveniently housed in
and on one cabinet. For the most part, this manual is organized around those subsystems to
provide you with ready access to information, as you need it.
1.1.1 How to Use this Manual
This manual is organized in a manner that is best suited for the typical manner in which the
reader would learn about the system, and then install, operate, and maintain it. Prior to the
table of contents of this manual is a disclaimer and a series of cautionary and warning notes
– it is important that these be read first. This first chapter provides an overall description of
the system, leaving more in-depth technical information towards the end of the chapter. The
next chapter describes how to install the system, followed by one or more chapters that
provide operation instructions, and ending with a chapter on maintenance. Following the
final chapter are several appendices that provide supplemental information. The installation
chapter covers everything related to installation, from unpacking the equipment as received,
through to ensuring correct installation and operation. The operation chapters cover the two
basic types of user interaction with the system: Manual (local) control and external computer
control. Please take the time to read these instructions to assure the safe and proper use of
this instrument.
1.1.2 Technical Support
Sutter Instrument Company at no charge provides unlimited technical support to our
customers. Our technical support staff is available between the hours of 8:00 AM and 5:00
PM (Pacific Time) at (415) 883-0128. You may also e-mail your queries to info@sutter.com.
Furthermore, as this manual is currently under construction, if there are any areas that you
feel should be covered in detail we would like to hear from you.