TELULAR PHONECELL WITH THE 8210 SPEECH MODEM
10
6.2 SAMPLE SENSOR SETUP
The last step in this example setup shows how a sensor is set to enable “Current Data” to be
included in the canned “Liv” report. This is done using the Alarm Sensor Options Menu. This Menu
is accessed from the System Setup Menu.
Figure 5 Alarm Sensor Option Menu
The figure above shows that the sensor named Battery has Alarm Options Enable
ON
, with the
Alarm Phases set to 67 (battery) and 177, (volts). These settings will cause the Liv report to state:
“ Battery is 12.52 volts.”
Other settings in the Alarm Sensor Option menu can be used to set high, low, or ROC (rate-of-
change) alarms. These settings could be used to have the Speech Modem dial out to up to three
phone numbers and announce alarm conditions with current sensor values.
(Complete details for using the 8210 Alarm Sensor Option are presented in the System
Setup\Alarm Options section of Chapter 4 of the
8210 Operators Manual
.)
