9
CHAPTER 1 Getting Started
Setting up USB Camera
The included USB camera is used as both
a sensor and an evidence capture camera.
Connect the camera’s USB to your
computer. The camera should be set up to
view the base of the robot with the phone
in frame. Once connected, the camera’s
viewpoint will be visible in the Burner
Breaker software interface.
The Burner Breaker software will create a
folder on your desktop, where it will store
evidence reports containing a picture of
each attempt to break into the phone. The
name of the files contained in the
evidence report will be the pincode used
by the robot. For example, if the picture
named “0007” shows the phone open, the
pincode to access the phone is “0007.”
For advanced sensor set up, please refer
to page 23.
