mr
.
steam
®
Installation, Operation & Maintenance Instructions
_____________________________________________________________________________________________
MOUNTING DIMENSIONS
NOTE:
“C” dimension is not applicable for cord con-
nected models
IMPORTANT NOTE:
Towel Warmers may have
small dimensional variations and must be measured
prior to installation. Do not use dimensions to
determine location of mounting holes.
4
WALL PREPARATION
• DO NOT mount the Towel Warmer without providing
structurally secure upper and lower headers as shown.
• DO NOT mount the Towel Warmer directly to sheet
rock or any other non-structural surface.
• Use longer fasteners as required if the finished wall
surface prevents adequate mounting with the screws
provided.
• Provide a clearance hole in the lower header as
required to route field wiring to the Towel Warmer
wiring box.(not applicable for cord connected models)
IMPORTANT NOTE: See electrical rough-in instruc-
tions on page 6.
IMPORTANT NOTE:
Towel Warmers may have small
dimensional variations and must be measured prior to
installation. Do not use dimensions to determine
location of mounting holes.
MOUNTING DIMENSIONS
(inches)
Hard Wired & Cord Connected
MODEL
A
B
C
W328
18
7
⁄
16
17
15
⁄
16
7
1
⁄
4
W336
18
7
⁄
16
25
9
⁄
16
7
1
⁄
4
This
End
Up
Wiring Box
Upper
Header (Z)
Lower Hea
der (Z)
Finished
wall surface
Towel Warmer
MOUNTING DIMENSIONS
(inches)
Hard Wired & Cord Connected
MODEL
X(min)
Y
Z (min)
(Header horizontal length) (Header vertical length) (Header size)
W328
19
17
15
⁄
16
2 x 6
W336
19
25
9
⁄
16
2 x 6
For Technical Service Assistance:
East Coast Tel: 1-800-767-8326
West Coast Tel: 1-800-727-8326
CAUTION
!
