Model # 22
-
8899
Model # 22
-
0099
Airless END Cart
Customer Service:770-518-0045
Fax: 770-518-8507
Website: www.suspenz.com
Suspenz®, Inc.
8725 Roswell Road #0-220
Atlanta GA 30350
Suspenz
®
products are warrantied for life against defects in material or workmanship to the original owner. Product must
be used for its intended purpose under normal conditions. Please visit www.Suspenz.com for complete warranty
information.
OUR PLEDGE TO YOU
For Technical assistance or Replacement parts: call 866.787.7369
1.
Adjust height of the side tubes (approximately the
depth of your boat plus 4”) so that the upper crossbar
rests on top of the boat with the cart angled forward as
shown in picture.
2.
With the cart leaning forward at about a 45 degree an-
gle, slide either end of boat into the cart opening with
the boat keel sitting in the bottom “V” padding. Note:
Hull geometries vary. If boat does not rest on the pad-
ded crossbar, flip the cart so that it does.
3.
The boat should slide in about ¹/₄
-
¹/₃ of the boat’s
length.
4.
Adjust bungee cord length and connect it to a secure
place in or around the cockpit.
Care
Rinse cart after each use to clean off sand, salt and mud.
Caution
This cart is designed for hand towing
only. It is not intended to be pulled
behind a bicycle or motorized vehicle.
Visit www.Suspenz.com for additional
transportation and storage solutions.
Figure 5
Figure 4
