Surveon CAM6181, Руководство пользователя, Страница: 75 / 87

75
5.6. PTZ
Under the PTZ tab, there are categories including: Preset , Cruise , Auto Pan ,
Sequence , Home , Tilt Range , Camera- Exposure , Camera- WB , Camera- Misc1 ,
Camera- Misc2 , and Camera- Defau lt.
Preset
The Preset Programming can be found under this path: PTZ > Preset . Totally 256
Preset Points can be programmed for the IP Camera. Please refer to the instructions
below to set a Preset Point.
Preset Setting
To setup a Preset Point, please first move the cursor to the live view pane. Then left
click and drag the red pointer with PTZ controls to a desired position and adjust the
fine zoom/focus ratio. Subsequently, assign a number for the current position from
the drop-down Number List (click on Pre Page or Next Page Button to reach number
1 to 256), and enter its descriptive name. Click on the Set Button to save the
settings mentioned above.
Preset Go
To have the camera move to a specified Preset position, please select the Preset
Point from the drop-down Preset list (click on PrePage or NextPage Button to reach
preset number 1 to 256). Then the camera shall readily move to the target position.
Cruise
T
he Cruise Programming can be found under this path: PTZ > Cruise . The IP Camera
supports up to eight Cruise Paths. Please follow the instructions below for Cruise
Path setup.
Cruise Setting
To setup a Cruise Path, please first select a path number from the drop-down list.
Then move the cursor to the live view pane, and move the camera to a desired view
(PTZ controls) as the start point of a Cruise Path. Click on the Set Button of Record
Start and start programming the Cruise Path via PTZ controls. When finishing