Surveon CAM5210
2.2. Functions
Status LED indicator
The LED will light up after the camera has successfully completed the boot
process. The Status LED indicator in the rear of the camera can be set to
light whenever the unit is accessed, or be shut off.
Network connector
The camera connects to the network via a standard RJ-45 network
connector. The camera detects the speed of the local network
(10/100BaseT). The camera also supports PoE (Power-over-Ethernet), and
can be powered directly through the network cable.
SD/SDHC card slot
The SD/SDHC card slot can be used for local recording and firmware
upgrade.
Reset button
Pressing the reset button will restore the camera to its factory default
settings, as described in Resetting to the Factory Default Settings.
Audio in / out
Audio in /out are both for 3.5mm jacks. Audio-in provides for an external
mono microphone. Audio out can be connected to a public address system
or an active speaker with a built-in amplifier. A pair of headphones can
also be attached.
Power connector
The power connector and supplied power adapter is provided for solutions
without PoE.
I/O terminal connector
The I/O terminal connector provides digital input, digital output, and
connection points for auxiliary DC power and GND.
www.surveon.com
4