background image

 

Surveon CAM4210 

Event Notification  

Event Notification settings, found under Settings> Event Notification, deal 

with the event detection, scheduled recording, and notification abilities of 

the camera.  

Event Server 

The event server, which can be configured under Event Notification> Event 

Server, is the communications center of the camera. This section deals with 

the configuration of E-mail and FTP notifications, as well as remote recording.  

Email Settings 

Email settings are used to configure e-mail notifications. 

 

Sender Email Address – The return e-mail address for notifications. 

This should be your notification address. 

 

Recipient email address – The e-mail address notification emails will 

be sent to. Only one email address can be entered. 

 

Server address - The IP or address of the e-mail server. 

 

User Name - The user name of the notifications e-mail account. 

 

Password - The password of the e-mail account. 

 

SMTP Server Port - the SMTP port of the email server; Default 25. 

 

Test - Click this button to send a test email. E-mails will only be sent 

if all parameters are entered correctly. 

www.surveon.com

 

 

38 

Содержание CAM4210



























































Отзывы: