Surveillix IKS-WR7413, Руководство пользователя

Страница: 35 / 48

35042AD 35
ALARM APPLICATION
The alarms menu is where alarm connections are
configured.
Alarm Switch – Designate when the alarm will be
active; Off, On, or By Schedule.
Alarm Type – Designate if the alarm is normally
open or normally closed.
•
NOH – NO stands for Normally Open.
•
NC/L
– NC stands for Normally Closed.
Example:
A door sticker consists of two contacts that are connected
when under normal conditions. This type of input would be a NC/L or
normally closed alarm. The alarm will trigger when the two contacts are
no longer connected, such as an abnormal condition when the door is
opened.
Alarm Output – Choose high or low.
Trigger Action – Specify which actions the camera should take when
motion is detected.
•
Send Alarm Message by FTP / E-mail – Select to send an alarm
message to a configured FTP and/or e-mail address when motion
is detected. When sending to email, the alarm notification is
text only. When sending to FRP, the alarm notification will
upload a text file to the FRP location.
•
Upload Images by FTP – Select to assign an FTP site and
configure various parameters as shown in the figure below. When
motion is detected, event images will be uploaded to the
appointed FRP site.
•
Upload Image by E-mail – Select to assign an e-mail address and
configure various parameters as shown in the figure below. When
motion is detected, event images will be sent to the
appropriate e-mail address.
Note
Make sure SMTP or FTP configuration has been completed. See the Mail
and FTP sections for more information.
•
File Name –
Enter a file name in the box, ex. Image.jpg. The
uploaded image’s file name format can be set in this section.
Select the one that meets your requirements.
Consult the documentation to the sensor input device to determine which
of these to use.