10
saw in its tilted-up position until the moving
blade is exactly over the chosen point of entry.
Lower the rear of the shoe toward the work
maintaining a firm pivoting.
Pressure in the shoe lips with the blade ex-
actly on lined NOT MOVE THE SAW FORWARD
ALONG ITS CUT until the saw blade has com-
pletely entered the material and the shoe
comes to rest flat on its surface.
SUGGESTIONS FOR PROPER USE
• Cut at an even rate and take care not to over
load the saw.
• Excessive force on the saw will prevent the
pendulum action operating correctly and re-
duce the cutting efficiency.
• When cutting tight curves, reduce or switch
off the pendulum allying.
MAINTENANCE
NOTE: Be sure to switch power OFF and discon-
nect the plug from the receptacle during main-
tenance and inspection.
1. Periodically clean all dust and wood chips
from around and under the base. Even though
slots are provided to allow debris to pass
through, some dust will accumulate.
2. The brushes are designed to give you several
years of use. If they ever need replaced follow
the instructions in this manual or return the
tool to the nearest service center for repair.
VOLTAGE-FREQUENCY
SPEED
CUTTING CAPACITY;
Wood
POWER
WEIGHT
120 V ~ 60 Hz
(800 - 3 000) r/min
3 5/16” (85 mm)
750 W
1,8 kg (4 lb)
TECHNICAL DATA
SK503A manual.indd 10
29/09/15 12:41
