9
E N G L I S H •
User's Manual
IMPORTANT: This appliance is not intended
for use by persons (including children) with re-
duced physical, sensory or mental capabilities
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.
TOOL USE AND CARE
Do not force the power tool. Use the correct
tool for the application. The correct tool will do
the job better and more safely at the rate that it
was designed to work at.
Do not use tools if switch does not turn it on or
off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
Disconnect the plug from the power source be-
fore making any adjustments, changing acces-
sories or storing the tool. This preventive safety
measures reduce the risk of accidental starting
of the tool.
When the power tool is not in use, store it out
of the reach of children, and do not allow in-
dividuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
edges, are less likely to stuck in workpieces or
easier to control.
Is recommendable to use a safety device suit-
able, such a thermal and differential switch
when you are using an electric equipment.
SERVICE:
Tool service must be performed only
by qualified repair personnel. Service or main-
tenance performed by unqualified personnel
could result in a risk of injury.
NOTE: When the machine is not in use, always
disconnect it of the power supply.
SPECIFIC SAFETY RULES FOR
ELECTRIC TRIMMER
1. Use extreme caution when placing the guard,
as it has a blade for cutting the nylon line.
2. Do not place the blade above the level of the
feet pointing straight ahead or to animals while
operating.
3. If the trimmer starts to vibrate abnormally,
stop using it and take it to the nearest autho-
rized service center.
4. Be careful when you turn the trimmer off,
once off the cutting head continues to rotate
for a while more.
5. Remove stones, sticks and elements outside
the work area before starting the operation.
Failure to follow this indication, will cause some
element to fly toward the operator by the speed
of the nylon.
6. Do not run when using the trimmer.
7. Do not use the tool in any application other
than what it was intended.
8. In hills, cut on the circumference of the hill
and never in the direction from top to bottom.
9. Never replace the nylon with a metal wire.
10. Never use the tool when weather conditions
are not adequate, never operate in the rain or
extreme humidity.
11. Use the trimmer in daylight or with good
artificial light. Never use when visibility is poor.
12. Do not exceed operations or force the tool.
Keep a good position and balance at all times.
WARNING: The cutting elements continue
rotating after turn of the motor.
FEATURES
KNOW YOUR TOOL
Before attempting to use this product, become
familiar with all of its operating features and
safety requirements.
1. MOTOR HEAD.
2. EDGE GUIDE.
3. SPOOL SET.
4. PROTECTIVE COVER.
5. LOCK FOR ROTATABLE MOTOR HEAD.
6. UNION NUT OF HEIGHT ADJUSTMENT.
7. LOCK KNOB FOR ROTATABLE THE TUBE OF
EDGE TRIMMER.
8. MAIN HANDLE.
9. CABLE HOLDER.
10. SWITCH TRIGGER.
