Changing/Cleaning Filters
Lift the Front Cover
upwards from the
bottom (A), then pull
out at the bottom
(B), then pull the
case downward (C).
1. Removing Front Cover
2. Removing Filters
Pull the strings attached to
either side of the HEPA
filter, then pull out.
Activated Carbon Filter:
This is next in line after the
HEPA. It needs to be re-
placed every 6 to 12
months.
TiO2/Photocatalytic Filter:
This is next in line
after the activated carbon filter. It needs to be
replaced about every 12 months.
3. Installing/Removing UV Lamp
Installing UV Lamp:
Hold both ends of
the lamp, insert into
lamp holders, then
twist clockwise.
Removing UV Lamp:
Holding ends of the
lamp, twist counter-
clockwise, then pull
outward.
4. Cleaning Washable HEPA Filter
Check the HEPA
filter periodically. If
it is dark gray in
color, then clean it
with a brush or
vacuum hose until it
is light gray or
white. You can also
clean the black pre-
filter attached to the side of the HEPA, facing
outward. For optimal performance, change the
HEPA filter every two years.
5. Re-Inserting Front Cover
When finished, reinsert the front cover. Place the
bottom clips into place first, then make sure you
push the front cover tightly back into place.
Replace UV lamp about every 12 months.
