Surna 120-3, Руководство по эксплуатации и техническому обслуживанию, Страница: 13 / 20

13
glycol/water mixture may cause system
inefficiencies or damage to the evaporator,
which is not covered under warranty.
• NEVER set the chiller below 45°F (7°C) or risk
freezing the evaporator, which is not
covered under warranty.
• Only use properly sized breakers and wiring
with an appropriate ampacity or damage to
the compressor could occur. The further the
unit is away from the breaker box, the larger
the wire gauge must be to carry
sufficient amperage when the compressor
starts. Damage caused by improper wiring is
not covered under warranty. Please consult
with a qualified electrician for more
information on proper breaker and wire sizing
if you are not sure.
• Chillers must be installed on concrete or
an A/C condenser pad. Failure to do so can
cause the condenser to become dirty sooner
from splashing dirt and debris when it rains.
This will also cause premature rusting of the
chiller base where it contacts the ground.
• Proper voltage must always be maintained.
Consult the System Specification section of
this document for more information.