SurfLink A00, Руководство по эксплуатации

Страница: 3 / 9

5 4
This document contains instructions for connecting
SurfLink Programmer into your laptop or desktop
PC via a USB connection. SurfLink Programmer
requires the latest available Inspire X software to be
installed.
Description
SurfLink Programmer is a USB hearing aid
programmer functioning as the interface between
wireless hearing aids and computer fitting software.
It consists of a USB cable and SurfLink Programmer.
Physical and Performance Characteristics:
• Indicator lights for power and data transfer
activity
• SurfLink Programmer to PC connection on
USB is capable of up to 480 Mbps (USB 2.0
high speed)
Installation
1. Confirm that Inspire X 2011 or higher
is installed. (SurfLink Programmer is not
supported on earlier versions of Inspire X fitting
software.)
2. Plug the square end of the USB cable into the
back of SurfLink Programmer making sure it is
inserted fully.
3. Insert the rectangular end of the USB cable into
an open USB port on your PC.
4. Follow the on-screen prompts in the “Add New
HardwareWizard” screens. SurfLink Programmer
is designed to be “plug and play” and does
not require a CD or a restart of the PC.
5. Locate SurfLink Programmer at least 5 feet/1.5
meters from the patient.
Operation
Once installed, SurfLink Programmer is ready to use.
To use:
1. Verify SurfLink Programmer is connected to
the PC
2. Launch Inspire X 2011 or higher
3. Search for SurfLink Programmer (if needed)