Connect Power - Router
a. Connect the power cord (included) to the
Power
port on the rear of your SBR-AC1750.
b. Plug the power cord into an available electrical wall
outlet.
Make sure the
Power
,
WAN
,
Wireless
, and
connected
Ethernet
LEDs on the SBR-AC1750 front
panel light up SOLID green.
If the
WAN
LED did not light up solid, check the
Ethernet
cable connection to make sure it is
properly connected.
Start the Router Web Manager
a. Open any web browser on your computer, type
192.168.0.1
in the address bar and then press
Enter
.
b. Type the default user name:
admin
.
c. Type the default password:
password
.
d. Click
Login
to open the web manager.
Confirm Connection - Router
a. Open a web browser (such as Internet Explorer,
Google Chrome, Firefox, or Safari) on your computer
or other device that is connected to the white Ethernet
port on your SBR-AC1750.
b. Type a valid URL (such as
www.surfboard.com
) in the
address bar and then click or press
Enter
.
The ARRIS website should open.
• If your SBR-AC1750 fails to connect properly, please
power cycle your modem to reset the IP addresses.
• If the website did not open, please reconnect your
device directly to your modem and repeat
Step 1
above.
• If the website still fails to open, please contact your
service provider for assistance.
Connect Ethernet - Modem, Router &
Computer
a. Disconnect the existing Ethernet cable connection
from your modem.
b. Connect that Ethernet cable to one of the four white
Ethernet
ports on the rear of the SBR-AC1750.
c. Connect the blue Ethernet cable (included) to the
Ethernet
port on the rear of your modem.
d. Connect the other end of the blue Ethernet cable to
the blue
WAN
port on your SBR-AC1750.
Step 1
Test Internet Connection - Modem
Note: If you are installing a new modem (or other
broadband connection device), please refer to the installation
instructions provided with your modem before proceeding
with the wireless router installation (see
Step 2).
Perform the following Internet connectivity test to check
the Ethernet connection between your modem and
connected device, such as a computer or laptop:
a. Make sure your modem is powered ON.
b. Power ON and log in to the computer connected to
your modem.
c. Open a web browser on the computer (such as
Internet Explorer, Google Chrome, Firefox, or Safari).
d. Type a valid URL (such as
www.surfboard.com
) in the
address bar and click or press
Enter
.
The ARRIS website should open. If it did not open,
please contact your service provider to set up your
Internet service.
Step 3
Step 6
Step 5
Step 4
Connect and Confirm Your Wireless
Connection - Router
a. From your computer, click on the
Wireless
Network LInk
icon located on your Windows
taskbar to open the wireless networks list.
b. Scroll down and click on your wireless network
name,
SURFboard-XXXX
(see
SSID
number listed
on the router label).
c. Select
Connect automatically
and then click
Connect
to complete the remaining wireless
network entries (see router label for the
Wi-Fi
Security key
).
d. Click
OK
when done.
Step 2
