5
SC-TDC-1100 Series Manual
2 General Information
2.1 General Information
This manual is intended to assist users in the operation of the Releases 212, 312 and 322 of the SC-TDC-1100
series. It is divided into 4 chapters. The chapter “General Information” contains a brief overview of the
devices as well as the safety instructions. The chapter “Installation” refers to installation and cabling. The
other chapters contain amongst others technical details and the description of the device layout.
2.2 Safety Instructions
The “caution symbol” marks warnings, which are given to prevent an accidental damaging
of the detector or the readout system. Do NOT ignore these warnings and follow them
strictly. Otherwise no guarantee is given for arose damages.
Note
The “note symbol” marks text passages, which contain important information/hints
about the operation of the detector. Follow these information to ensure a proper
functioning of the detector.
The “high voltage symbol” marks warnings, given in conjunction with the description of
the operation/use of high voltage supplies and/or high voltage conducting parts.
Hazardous voltages are present, which can cause serious or fatal injuries. Therefore
only persons with the appropriate training are allowed to carry out the installation,
adjustment and repair work.
Please read this manual carefully before performing any electrical or electronic operations and strictly
follow the safety rules given within this manual. Surface Concept declines all responsibility for damages
or injuries caused by an improper use of the module due to negligence on behalf of the User.
The following symbols may appear throughout the manual:
Please also respect the Surface Concept Device Safety Instructions Manual in addition
and all given safety rules within it.
Note
SC-TDC-1100 Series Manual | Surface Concept GmbH
