22
SC-TDC-1000 S Series Manual | Surface Concept GmbH
• Trigger to rising edge
• Start retrigger frequency (max.): 7MHz
• Measurement range: 0ns – 10.7µs in start-stop operation
(measurement range of 10.7µs corresponds to a start frequency of 93.5kHz)
• Extended measurement range of up to 82.3ps x 64bit (>17000d) in reference mode
• Internal start frequency divider (2-, 4-, 8-, 16- and 32-fold divider)
• Dynamic range: 2E19
• All channels provide precisely an equal resolution
• 32-fold multi-hit capability per channel
• 40MHz internal device measurement rate
• Stop Signal Input: Low voltage TTL on 50Ohm BNC socket
• External Start Signal Input: Low voltage TTL on 50Ohm BNC socket
• External Start Signal Output: Low voltage TTL on 50Ohm BNC socket
• Device Synchronization Signal Input: Low voltage TTL on 50Ohm BNC socket
• Device Synchronization Signal Output: Low voltage TTL on 50Ohm BNC socket
• USB Interface for Data Transfer
SC-TDC-1000/08S - Release 012-E8 & 013-E8
• 2HE table top housing with 254mm x 272mm x 106mm (w/d/h) (R012)
• 19” 3HE Rack Mount Housing (R013)
• Number of Stop Inputs: 8
• Number of Start Inputs: 1 (common start input usable as reset of the internal clock resolution ad-
just mode: quartz-accurate, adjustable resolution, insensitive to temperature variations, adjustable via
software (no calibration necessary)
• Digital time bin resolution per channel: 82.3ps
• 5.5ns pulse-pair resolution on one channel and 0ns between two channels
• Trigger to rising edge
• Start retrigger frequency (max.): 7MHz
• Measurement range: 0ns – 10.7µs in start-stop operation
(measurement range of 10.7µs corresponds to a start frequency of 93.5kHz)
• Extended measurement range of up to 82.3ps x 64bit (>17000d) in reference mode
• Internal start frequency divider (2-, 4-, 8-, 16- and 32-fold divider)
• Dynamic range: 2E19
• All channels provide precisely an equal resolution
• 32-fold multi-hit capability per channel
• 40MHz internal device measurement rate
• Stop Signal Input: Low voltage TTL on 50Ohm BNC socket
• External Start Signal Input: Low voltage TTL on 50Ohm BNC socket
